Difference between revisions of "Anet A8"
(Created page with "Manufacture Site: <BR> http://www.anet3d.com/English/3D_Printer/106.html <BR> <BR> Build instruction video in 2 parts: <BR> https://www.youtube.com/watch?v=-tiHfzBQZpI <BR> ht...") |
|||
| (6 intermediate revisions by 2 users not shown) | |||
| Line 9: | Line 9: | ||
<BR> | <BR> | ||
https://www.youtube.com/watch?v=EbNocv6-OOQ | https://www.youtube.com/watch?v=EbNocv6-OOQ | ||
| + | <BR> | ||
| + | <strong>TODO</strong> | ||
| + | <BR> | ||
| + | link to setup tutorials | ||
| + | <BR><br> | ||
| + | Converting Sketch-Up (dae/COLLADA) to g-code: <br> | ||
| + | <b> Method 1: </b> <br> | ||
| + | 1) save sketch-up file (dae extension)<br> | ||
| + | 2) open Meshlab and open file (select "full scene") <br> | ||
| + | 3) From Filters->Normals,Curvatures and Orientation->Transform: Scale,Normalize, enter X,Y and Z scaling factor <br> | ||
| + | Note: <br> | ||
| + | * Used 50x to convert 1" in sketch-up to 2" model (todo: clear this up) <br> | ||
| + | 4) Select File->"Export Mesh as" and select .stl <br> | ||
| + | 5) Open .stl in Cura and save to g-code (press "Save to file" button on bottom right hand side) <br> | ||
| + | Notes: <br> | ||
| + | * in Cura simply use printer Prusa i3 and keep default settings <br> | ||
| + | * press "Eye" symbol on Left Hand side to access layer view <br> | ||
| + | |||
| + | <br> | ||
| + | Used following programs: <br> | ||
| + | MeshLab v2016.12 / Dec 23 2016 build <br> | ||
| + | Cura v 2.5.0 <br> | ||
| + | |||
| + | <BR> | ||
| + | contact info for tool questions: north | ||
Latest revision as of 18:09, 11 June 2017
Manufacture Site:
http://www.anet3d.com/English/3D_Printer/106.html
Build instruction video in 2 parts:
https://www.youtube.com/watch?v=-tiHfzBQZpI
https://www.youtube.com/watch?v=EbNocv6-OOQ
TODO
link to setup tutorials
Converting Sketch-Up (dae/COLLADA) to g-code:
Method 1:
1) save sketch-up file (dae extension)
2) open Meshlab and open file (select "full scene")
3) From Filters->Normals,Curvatures and Orientation->Transform: Scale,Normalize, enter X,Y and Z scaling factor
Note:
- Used 50x to convert 1" in sketch-up to 2" model (todo: clear this up)
4) Select File->"Export Mesh as" and select .stl
5) Open .stl in Cura and save to g-code (press "Save to file" button on bottom right hand side)
Notes:
- in Cura simply use printer Prusa i3 and keep default settings
- press "Eye" symbol on Left Hand side to access layer view
Used following programs:
MeshLab v2016.12 / Dec 23 2016 build
Cura v 2.5.0
contact info for tool questions: north
